Hydraulic Machines

Product Details:

NC Hydraulic Shearing Machines, a shearing machine has all the advantages of the hydraulic shearing machine. The NC controller adds some more special advantage to the machine. The fast and accurate multi-position back gauge system is very efficient and accurate. The machine productivity and accuracy are much improved with NC controlled back gauge.

 

Features:

• Variable Rake Angle Design Machines.
• Better cutting accuracy in thin sheets at the lower rake angle.
• Higher cutting capacity at the maximum rake angle.
• Low noise & smooth operation gives the higher efficiency of an operator.
• Automatic Rake angle adjustment.
• Pre-calibrated easy blade gap adjustment.
• Multi-steps automatic back gauge program.
• AC Servo Drive & Timer belt for Back Gauge Movement.
• Hardened & ground ball screw with linear motion bearings.
• Stroke counting on screen.
• Fast production of smaller jobs.
• Front sheet support.
• Squaring arm with steel rule for front gauging.
• Hardened Transfer bars mounted on the table.
• Hold down cylinders.
• The cutting area illuminated for the clear view of blades.
• Four edges HCHCr Blade suitable to MS & SS.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ANY PORT OF INDIA
• Delivery Time: READY STOCK OR 2-3 WEEKS

Product Details:

Hydraulic Press Brakes are highly productive, accurate, and economical. Through advanced design and construction, we offer quality Hydraulic Press Brakes that provide simplified and easily accessible controls for optimum operator efficiency and output. These are manufactured to high standards of lifetime durability and precision accuracy. Pair of hydraulic cylinders is synchronized mechanically by a heavy-duty torque tube construction.

Features:

• The stable robust welded steel frame made of ultrasonically tested IS 262 plates as per guidelines of IMTMA standards.
• Fast approach & fast return speed to save cycle time, slow pressing speed for better stroke control & bending accuracy, ensures high productivity.
• International quality hydraulics components. Specially designed compact. Manifolds give smooth, silent & jerk less operation.
• Front operated manual back gauge with micro-adjustment.
• Accurate & fine ram position control by the micro limit switch.
• Five-piece adjustable guides with special wear resistant liners.
• Hydraulic cylinder with twin type sealing low & high pressure and hard chrome. Plated rod with special type guide for long life without leakage.
• Centralized lubrication with flow control ensures adequate lubrication at all points.
• Moving workstation with on/off controls, emergency push button &selector for manual, semi-auto & automatic mode for easy operation & safety.
• Ram tilting to maintain banding accuracy over a period.

Specifications:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ANY PORT OF INDIA
• Delivery Time: READY STOCK OR 2-3 WEEKS

Product Details:

Salient Features:

• Guillotine type hydraulically variable rake angle design
• Better cutting accuracy in thin sheets at lower rake angle with twist free cuts
• Higher cutting capacity at a higher rake angle
• The stable robust ultrasonically tested IS 2062 grade welded structure
• Rigid box type structure with the inclined member for ram & table
• Less power consumption
• Hydraulic & electrical safety interlocks for overloading
• Better safety for operator and machine
• Fast production of smaller jobs
• NC up-gradation possible
• Low noise & smooth operation gives the higher efficiency of the operator

Standard Accessories:

• Main drive motor
• Electric control panel
• Hardened Transfer bars mounted on table
• Rake angle selection through selector switch
• Lever operated Blade clearance with calibration
• Fine stroke adjustment rod with limit switch
• Front sheet support
• Squaring arm with steel rule on left side
• Operational consol
• Hold down cylinders mounted on machine
• Cubing area illuminated for clear view of blades
• Four edge HCHCr Blade suitable to MS & SS mounted on machine
• Manual back gauge
  
  

Optional Accessories:

• Motorized back gauge with DRO
• Second squaring arm on another side
• Hy. Rear Sheet support
• Timer belt drive for back gauge
• Ball Transfer Table
• Stroke counter
• Ball screw instead of lead screw
• First fill with hydraulic oil

 

Technical Specification:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ANY PORT OF INDIA
• Delivery Time: READY STOCK OR 2-3 WEEKS

Product Details:

Salient Features:

• The stable robust welded steel frame made of ultrasonically tested IS 262 plates as per guidelines of IMTMA standards
• Fast approach & fast return speed to save cycle time, slow pressing speed for better stroke control & bending accuracy, ensures high productivity
• Compact cylinders & low-pressure system due to rear cylinders
• Better rigidity & load carrying capacity against fatigue failure
• The positive synchronisation of cylinders with welded torque tube
• Moving workstation with ON/OFF controls, Emergency push button & selector for Manual, Semi-Auto & Automatic mode for easy operation & safety
• Better safety for operator & machine Low power consumption
• NC upgradation possible

Product Details:

Features:

With wide range of speed and teed, with manual power and fine feeds. The feed of machines are very easily engaged and disengaged at any time.

With safe and reliable feed safety machine, all parts easy operation and change. All controls centralized on the head stock easy operation and change. Clamping for assemblies and speed change of spindle achieved by hydraudic power.

Main parts are made by machine center which import form KIA with high precision and efficiencyensuring reliability and high quality.

Integrating technology for casting parts is excellent, adopting casting equipment, ensuring high quality of materia for basic parts.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ANY PORT OF INDIA
• Delivery Time: READY STOCK OR 2-3 WEEKS

Product Details:

Engineering excellence with a cost-effective solution. The Hydraulic Iron Worker is designed to give an effective solution to all the cutting and punching problems of flat and section with satisfactory work quality from the robust and compact machine.

Hydraulic Iron Worker are designed & built to cut various material with different sections in easy & efficient manner. The machine is provided with different operation station in order to meet wide variety of cuttings sections like angle, channel, flat & plate can be cut very accurately & precisely. Moreover, machine is also having one station where differing pressing operation like punching, blanking, piercing & bending can be done.

Application:

• Angle shearing
• Channel shearing
• Flat shearing
• Punching
• Nothing

Features:

• Law initial cost
• Low tooling cost
• Easy & Quick setting
• Enormous versatility
• Accurate repetition
• User friendly
• Easy maintenance
• Standard spares, hence easy availability
• Blade for round bar, square/bar cutting, i-beam section cutting
• First fill of hydraulic oil
• Back gauge with ele. switch
• Light

 

Optional Features:

• Blade for angle cuffing, channel cuffing, flat cutting & notching
• Are stroke adjustment rod with limitswitch
• Hydraulic job clamping device
• Electric control panel
• Pair of foot switch
• Manual back gauge

 

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer)
• Port of Dispatch: ANY PORT OF INDIA
• Delivery Time: READY STOCK OR 2-3 WEEKS

Product Details:

We also manufacture Hydraulic H type Press  as per customer requirements.
Application: Submersible Industry, Railway, Workshop, Automobile Industry etc.