Milling Machine Spare Parts

Product Details:

NC Hydro Machine Vices are offered in a vast range of specifications to meet varied client demands. These vices are manufactured from supreme quality raw materials. The tamper-proof packaging of these machine vices is provided to prevent damages.

Features:

• Lightweight
• Efficient
• Toughly constructed

Specifications:

Product Details:

We deal in Quick Setting Vise.

Features:

• Special design for quick clamping. (From the acme thread shaft stationary)
• Quick setting by sliding movement
• Big clamping capability
• Operating very quick and easy, increase working efficiency
• Good for short term and massive production or prototype work
• Suit for milling machine, grinder machine, precision drilling machine using
• Accurate grounded and assembled
• Precision cut acme thread
• Horizontal & vertical

Specifications:

Product Details:

We deal in B-Type Milling Vise. Our customers can avail this range at reasonable rates. A wider bottom to increase clamping force. Groove device to collect cutting oil. Full 360 swivel base with line, accurate graduation.

Features:

• Easy to operate
• Lightweight
• Robust

Specifications:

Product Details:

Ours is a trusted name in the market that proffers Machine Vise For Shaping and milling use. Due to the tough construction, longer functional life and operational fluency, these efficient vices are massively acknowledged among our esteemed customers. The vise is rigidity, large range of clamping spans and more bigger clamping force at drawdown jaws, especially suitable for the heavy duty cutting and the heavy duty planner milling machine to camp large workpiece.

Features:

• Minimal maintenance
• Easy to operate
• Lightweight

Specification:

Product Details:

Right Angle Head is used on vertical milling machine to make horizontal work rigidity constructed suitable for horizontal cutting. The clamping bushing to suit milling machine.

Features:

• Loose 2 screws to match with machine
• Tighten 2 screws to fix on quill D
• Assemble with milling quill dia

Specifications:

Product Details:

500S: Uses sanding disc, can debur soft and rigid materials.

600: Easy to carry and time-saving. Suitable for heavy workpiece which can''t be easily moved. The tools can be chamfered 0-3mm bevel angle, radius, arc angle, irregular shape. Straight line, outer curve and etc. The machine is used to carry out chamfering operations on any kind of ferrous material in particular steel and cast iron. Equipped with square-shaped tungsten carbide inserts- 12.7x12.7x3.18 ISO 1203 Spun.

Specifications:

Additional Information:

• Item Code: VCF-600
• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A

Product Details:

Steel Bench Vise without Base offered can be made available in different options like hand clamp, bench vice, pipe vice, mini vice with material finish options including cast iron/aluminum alloy. Further, thee vices can be provided in heavy/light duty construction finish and can also be custom developed as demanded by the customers. Some of it features include available in size options of 4in, 5in, 6in, 8in and others; cast iron body with steel jaws; provide for competitive functional support.

Product Details:

Precision Pneumatic And Fixed Power Vise is suitable for mass production and to be used on machine centers, milling machines, drilling machines and special purpose machines. We design the hand wheel safety line in addition for anyone to distinguish the clamping safety distance of tools from exceeding the limit easily by eyes. Down trust "semi-spherical segment" mechanism eliminates jaw liffing and work-piece liffing. The material of the vise itself adopts the one-step design of high ductility graphitized casting iron (FCD-60), and the Bottom rail of the two sides has heating treatment that can assure good performance on accuracy, wear-resisting, and tension-resisting.

Specification:

Product Details:

Features:

• New Design: Adjustable Pressure Device. Suit For Processing Of Brass, Al, Plastic, Steel. Super Open Jaw Size, Smallest Open Jaw Size.
• Lock Proof System: Prevent wrong clamping force stucks the vise. 45 degree tilting function, allow 90 degree processing.
• Tilting function has more work free allowance will not lock or hit machine.
• Lower overall height provides more space for heavy cutting stability and bigger workpiece
• Tilting structure has strong tightening design
• All function same as VH Series, expect the tilting structure

Specifications:

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P,D/A
• Delivery Time: 2-3

Product Details:

Features:

• Tilting seat set by two locking screws, works in high stability

• Tilting degrees graduate for easy reading

• Swive base graduated to 360 degree and fixable in any position

 

Specifications:
 

Product Details:

The proffered Universal Dividing Head is vastly acknowledged in the market. Manufactured as per the industry guidelines, these robustly constructed and highly durable dividing heads are extremely popular among our esteemed customers. The proposed collection is provided in tamper proof packaging in order to avoid damages.

Features:

• Robustly constructed
• Highly durable
• As per industry guidelines

Specifications:

Products Details:

Product Details:

Features:

• Angles can be set in 3 dimensions
• Swivels 360 degree around base
• The vise can be elevated through 90 degree from the horizontal to vertical
• And also can be tilted on its lower angle base up to 45 degree in both right and left
• Tilting of any angle all keep the workpiece steady, smooth
• Particually the clamping part of screw is strengthened by a bush made of gunmetal

Specifications:

Product Details:

We are offering Super Open Vise.The offered products are available in the market at industry leading prices.

Product Details:

Specifications:

Product Details:

It was made of tool steel or stainless steel system and was precision ground after hardened by heat treatment. So, it will not be rusted even thought permeation. The vise can clamp workpiece by moveable jaw without lifting. It is getting more easier and convenient for processing in a smaller workpiece.

Product Details:

Universal Tilting Rotary Table is an accurately designed table for milling, boring and other machine tools. This table allows indexing, facing and other work to be carried out rapidly with extreme precision.

Tilting range 0-90 degrees from horizontal to vertical position, 1 rotation of handle equals 3 degrees, 5 minutes tilting reading.

Features:

• 10 Second Vernier Scale.
• Table Dial 1 Minute Graduations.
• Fast Degrees: Dividing Notch Pin & 24 Holes in 15 Degrees Around The insures Rapid Accurate Spacing.
• Minimum Set-up time.
• Rugged Construction.

Additional Information:

• Pay Mode Terms: L/C (Letter of Credit),T/T (Bank Transfer),D/P
• Port of Dispatch: NAGASEVA
• Production Capacity: 100
• Delivery Time: 2-3 weeks

Product Details:

We are engaged in supplying Drill Vise. We manufacture these products utilizing quality-assured raw material and other basic components. Further, to attain maximum client satisfaction and for the same, we offer these products to our customers at industry leading prices.

Features:

Designed with solid structure assemble a pair of heat treated steel jaw

Suitable for clamping work piece on drill press machine & milling machine

Jaw pair and handle are surface treated by black oxide finish

Front fixed prismatic jaw with cross V-grooves is designed for clamping work piece firmly in both vertical & horizontal direction

 
Specifications:
Order No.ABC openDEE1FGHIJLMWeightDV-8584258527180287126456801678323.5DV-10010431100292203431378631022008365.7

Product Details:

Specifications:

Product Details:

Specifications:

Additional Information:

• Item Code: VP-018

Product Details:

Products Details:

 

Additional Information:

• Item Code: VP-168

Product Details:

As cutter replacement needs only 3 sec and the speed of replacement is more than 10 times to compare with traditional cutter replacement. Air Power Draw Bar will increase your productivity with more profits.

Features:

• It can be installed in any kind of machine, of which the main spindle are R-8, NT #30, #40 or #50
• It is convenient for the machinist who wants increased production and performance from his machine
• It is suitable for NC and general milling machines
• This device is easily installed needs only 5 seconds to change the cutting tool
• Main power is air compression
• This device is designed with safety device controlled with solenoid valve
• The power drawbar cannot be operated while machine is running

Standard Equipment:

• Power motor
• Control box
• Air filter and lubricant
• Drawbar
• Mounting hardware

 

Specifications:

Product Details:

Features:

Special design worm and worm gear with linkage transmission mechanism, well construction and highly power output

The ram-sliding surface are hardened and precision ground

Built-in lubricating system for smoothly running and prolong the life of head

Available mounting on any type milling m/c back side of the ram

 
Optional Accessories:

Flange A

Flange B

Slotting bar & cutter 4, 5, 6, 7, 8, 10 mm

Specifications:
ORDER NO.CUTTER & DESCRIPTIONWeight (KG)VSH-4CSlotting bar 4mm0.32VSH-5CSlotting bar 5mm0.32VSH-6CSlotting bar 6mm0.56VSH-7HSlotting bar 7mm0.62VSH-8HSlotting bar 8mm0.8VSH-10HSlotting bar 10mm0.81VSH-FGAFLANGE A11VSH-FGBFLANGE B23

Product Details:

Features:

• Special dovetail degree, also can supply.
• VHA-TYPE including right angle head, long horizontal arbor and breaker. VHA-R-8-27mm VHA-NT-30/NT-40-27mm for the mm size, for inch size are same 25.4mm (1'''')
• The quill diameter is same as VRA-Type

 

Benefit:
Convert your vertical mill to a horizontal mill. Designed to simplify right angle work by reducing the need for special tooling and complex fixtures, gains your efficiency, save your time and money.

Specifications:

Product Details:

Being a new entrant in this industry, we are engrossed in providing Eye Shield. Our offered shields are manufactured in adherence with the international quality standards. Also, to suit the variegated demands of clients, we offer these products in different weights and sizes. The clamping height is adjustable with brass plate under the clamp arm for protecting the working material from damage.

Features:

• Application specific design
• High strength
• Low maintenance

Additional Information:

• Item Code: VH-56

Product Details:

Set Including:

• Coolant pump
• Coolant tank
• Connecting cable (plug for 1 ph)
• Coolant hose kit magnetic base
• Flexible conveying hose
• Drain hose
• Tool kits
• ON/OFF switch (for 1 ph)

Specifications:

Product Details:

Specifications:

Product Details:

Simple Rotary Chuck can be placed and fixed on your desired position. 360 deg vernier scale: smooth swivel motion and easy locking by screws. Both horizontal and vertical position could be used on milling and machining center.

Specifications:
 

Product Details:

Specifications: